The Teknologg ASW-28 CO2 & temperature WIFI sensors are used for monitoring of CO2 Levels & temperature using WIFI.
Features:
- Long term stability
- Supports HTTP/HTTPS/TCPIP/MQTT
- Station/SoftAP WIFI Modes Support
- Local/Cloud Monitoring
- High Accuracy
- Programmable Alarm Points
- Easy installation
The Teknologg ASW-28 CO2 & temperature WIFI sensors are used for monitoring of CO2 Levels & temperature using WIFI.
Internal WIFI supports both Station/SoftAp, so it is possible to access sensor data on local network or directly connect to device and get data.
Using Teknologg Mobile Application/Daloco Software Data can be read from device.
The sensor can connect to The Teknologg cloud servers by default. In order to connect this device to other IOT platforms please contact us before purchasing.
CO2 Characteristics
sensor Type Photo acoustic
Measuring range 0 ~ 2000 ppm or
0 ~ 5000 ppm
Please refer to ordering information
Accuracy ± (50 ppm + 5% of reading) 0 ~ 2000ppm
±(40 ppm + 5% of reading) 0 ~ 5000ppm
Repeatability ±10 ppm
Response Time 60 S
Resolution 1 ppm
Long-term drift ± (5 ppm + 0.5 % of reading)
Temperature Characteristic
Measuring range -10 ~ 60 °C
Not for use in condensing conditions
Accuracy ±0.8 °C @ 15 ~ 35°C , ±1.5 °C @-10…60 °C
Repeatability ±0.1 °C
Resolution 0.1 °C
Long-term drift <0.03 °C/yr.
General Parameters:
| Power Supply | 5~ 12 VDC |
| Power Cable | DC Female power Connector |
| Power Cable Length | 1.5 meter (can be extend as request) |
| Housing | IP40 |
| Dimensions | 88.5x63x27.5 mm |
