The Teknologg AS-19 Barometer sensors with analog/Modbus output can be used for general purpose applications.
Features:
- Long term stability
- High Accuracy
- Analog/Modbus output
- Optional automatic error correction based on reference calibration values
- Easy installation
The Teknologg AS-19 Barometer sensors with analog output can be used for general purpose applications.
Air Pressure Values Are compensated over temperature changes to achieve best accuracy.
AS-19 supports optional USB interface
with the Daloco software. This feature provides Real time data monitoring and
uploading calibration table of sensor, after calibrating it in the third party
laboratories.
AS-19 supports automatic error
correction based on reference calibration values, this feature guaranties
sensor accuracy in different conditions and longtime operation.
Air Pressure Characteristic
Measuring range 300 ~ 1100 hPa
Not for use in condensing conditions
Accuracy ±1 hPa @ t>0
±1.7 hPa @[-20 ~ 0] °C
Repeatability 0.1 hPa
Resolution 0.1 hPa
Long-term drift ±1 hPa/yr.
General Parameters:
Power Supply 5~ 12 VDC
Output Voltage/Current/Modbus
Interface USB (optional)
Cable Length 4 Wire cable, Length: 1.5 meter
(can be extend as request)
Connection Gx12*4 pin
Dimensions 122×58.8×34.3 mm
| Product Number | Details |
|---|---|
| AS19.1.y | Sensor with 0~5 vdc outputs |
| AS19.2.y | Sensor with 4~20 mA outputs |
| AS19.3.y | Modbus RTU |
| AS19.x.0 | No USB Device |
| AS19.x.1 | USB Device |